Alco-Screen® 02 is a simple, cost-effective tool that monitors alcohol consumption as part of a comprehensive Zero Tolerance testing program. Alco-Screen® 02 is a Conforming Product for US Department of Transportation mandated testing of all transportation and safety-sensitive employees for blood alcohol concentrations above the federally mandated zero tolerance level of 0.02%. Alco-Screen® 02 is FDA 510(k) cleared for home use and is CLIA waived.

DOT Approved

Alco-Screen® is a rapid, highly sensitive method to detect the presence of alcohol in saliva and provide an approximation of relative blood alcohol concentration. Since it is well established that the concentration of alcohol in saliva is very close to that in the blood, saliva is the preferred specimen for alcohol testing, allowing for greater detection sensitivity than breath testing methods. Alco-Screen® is a simple, one-step, 2-minute test that requires no instrumentation, calibration, or special training to be used effectively. It is convenient enough to be used any time and in any place.

This product is sold in packs of 25 forms.

• Fully updated to requirement 49 CFR Part 40
• Snap-out format for quick testing
• 3-ply carbonless forms measure 8 1/2" W x 11 3/4" L
• 1 line street address for easy data entry
• Environmentally responsible carbonless paper with vegetable oil capsules

This product is sold in packs of 25 forms.

• Updated to meet all Non-DOT form requirements
• Snap-out format for quick testing
• 3-ply carbonless forms measure 8 1/2" W x 11 3/4" L
• 1 line street address for easy data entry
• Environmentally responsible carbonless paper with vegetable oil capsules

Key Features:

1. Refrigeration is required.
2. After opening, Controls are stable for six months if frozen or until expiration dates.
3. 5 ml bottle.
4. Controls can be aliquoted and frozen.
5. A synthetic urine-based matrix simulates patient samples.

Key Features:

1. Refrigeration is required.
2. Store at -20°C to 8°C
3. 5 ml bottle.
4. Controls can be aliquoted and frozen.
5. A synthetic urine-based matrix simulates patient samples.

Key Features:

1. Refrigeration is required.
2. Store at -20°C to 8°C
3. 5 ml bottle.
4. Controls can be aliquoted and frozen.
5. A synthetic urine-based matrix simulates patient samples.

Run a Personal Background Check Now! No surprises. A simple no frills process, just secure, simple, reliable background checks.

I-DUC-111 Adulteration Strips are used to determine specimen legitimacy when testing urine for drugs. These 6-parameter specimen validity strips help verify specimen integrity by testing for creatinine (CR), glutaraldehyde (GL), nitrate (NI), oxidants (OX), ph (PH), and specific gravity (SG).

Below you can find PDFs with more information:

• Adulteration Test Strip Insert
• MSDS Information Sheet
• Instant Drug Test Result Form
• Cross-Reactivity Chart

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DAM-114 screens for AMP.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DBA-114 screens for BAR.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DBZ-114 screens for BZO.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DCO-114 screens for COC.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DMA-114 screens for mAMP.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DMT-114 screens for MTD.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DMO-114 screens for MOP.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DMD-114 screens for MDMA.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DOP-114 screens for OPI.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DOX-114 screens for OXY.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DPC-114 screens for PCP.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DPP-114 screens for PPX.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DTC-114 screens for TCA.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DTH-114 screens for THC.
4. Store as packaged in the sealed pouch at 2°-30°C (36°- 86°F).
5. A rapid urine screening test.

Key Features:

1. One Step “Dip & Read.”
2. FDA-approved.
3. DBU-114 screens for BUP.
4. Store as packaged in the sealed pouch at 2°-30°C (36°-86°F).
5. A rapid urine screening test.

Key Features:

1. Includes Pipette for urine transfer.
2. SAMHSA Lab GC/MS Confirmation is optional.
3. FDA Cleared, CLIA WAIVED.
4. Results remain valid for up to 4 hours after test initiation.
5. I-DAM-102 screens for AMP.

Key Features:

1. Includes Pipette for urine transfer.
2. SAMHSA Lab GC/MS Confirmation is optional.
3. Immediate results.
4. Results remain valid for up to 4 hours after test initiation.
5. I-DBA-102 screens for BAR.

Key Features:

1. Includes Pipette for urine transfer.
2. SAMHSA Lab GC/MS Confirmation is optional.
3. Immediate results.
4. Results remain valid for up to 4 hours after test initiation.
5. I-DBZ-102 screens for BZO.

Key Features:

1. Includes Pipette for urine transfer.
2. SAMHSA Lab GC/MS Confirmation is optional.
3. FDA Cleared, CLIA WAIVED.
4. Results remain valid for up to 4 hours after test initiation.
5. I-DCO-102 screens for COC.

Key Features:

1. Includes Pipette for urine transfer.
2. SAMHSA Lab GC/MS Confirmation is optional.
3. FDA Cleared, CLIA WAIVED.
4. Results remain valid for up to 4 hours after test initiation.
5. I-DMA-102 screens for mAMP.